Ma sélection : 0 article(s) sélectionnés

Créateur de solutions serveurs en ligne

>> Je m’identifie
MON ESPACE PRO

 



1ère visite ?

Newsletter
Votre Email

Votre nom
 

 




Tous les articles de la même catégorie
<
>


SUPERMICRO 

X8DTL-iF

- X8DTL-iF
X8DTL-iF
Zoom


448.00€ HT

Carte Mère Intel Xeon jusqu'à 48GB DDR3 1333MHz ECC, Dual Intel Gigabit LAN, 6x SATA2 (3 Gbps), 1x PCI-E 2.0 x16, 1x PCI-E 2.0 x4, 1 PCI-E x4, 2x PCI 33MHz slots, IPMI 2.0 intégré.


Quantité 
En stock En stock
Ajouter aux demandes de devis







  • Caractéristiques détaillées

.Caractéristiques

 
1. Intel® Xeon® processor 5600/5500 
    series, with QPI up to 6.4 GT/s
2. Intel® 5500 (Tylersburg) Chipset
3. Up to 48GB** DDR3 1333/ 1066/ 
    800MHz ECC Registered DIMM / 24GB
    Unbuffered DIMM
4. Dual Intel® 82574L Gigabit 
    Ethernet Controller
5. 6x SATA2 (3 Gbps) Ports via
    ICH10R Controller
6. 2 (x8) PCI-E 2.0 (1 in x16 slot),
    1 (x4) PCI-E 2.0 (in x8 slot),
    1 (x4) PCI-E (in x8 slot),
    2x PCI 33MHz slots
7. Integrated Matrox G200eW Graphics
8. Integrated IPMI 2.0 with Dedicated LANProduct SKUs
 
 
.Référence constructeur
 
MBD-X8DTL-iF -O
X8DTL-iF (Standard Retail Pack)
MBD-X8DTL-iF -B
X8DTL-iF (Bulk Pack)
 
 
.Dimensions
 
Form Factor
ATX
12" x 10" (30.5cm x 25.4cm)
 
 
.Processeurs / Chipset
 
CPU Dual 1366-pin LGA Sockets
Supports up to two Intel® 64-bit Xeon® processor(s) of the same type below:
Intel®
Xeon®Processor 5600 Series (Westmere)
Intel®
Xeon®Processor 5500 Series (Nehalem-EP)
QPI
up to 6.4 GT/s
 
 
.Mémoires supportées
 
Memory Capacity
6x 240-pin DIMM sockets
Supports up to 48 GB** 1333 / 1066 / 800MHz DDR3 ECC Registered memory
Supports up to 24 GB 1333 / 1066 / 800MHz DDR3 ECC / Non ECC Unbuffered memory
Memory Mirroring supported
Memory Type
1333 / 1066 / 800MHz ECC Registered / ECC or Non ECC Unbuffered DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes
1GB, 2GB, 4GB , 8GB**
Memory Voltage
1.5 V
Error Detection
Corrects single-bit errors
Detects double-bit errors (using ECC memory)
Supports Intel® x4 and x8 Single Device Data Correction (SDDC)
 
 
.Connecteurs internes
 
Chipset Intel® 5500 (Tylersburg) chipset
ICH10R + IOH-24D
SATA
Intel ICH10R SATA 3.0Gbps Controller
RAID 0, 1, 5, 10 support (Windows)
RAID 0, 1, 10 support (Linux)
IPMI
Support for Intelligent Platform Management Interface v.2.0
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
Winbond® WPCM450 BMC*
Network Controllers
2x Intel® 82574L Gigabit Ethernet Controllers
Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
1x Realtek RTL8201N PHY (dedicated IPMI)
Graphics
Matrox G200eW
Super I/O
Winbond® 83627DHG-P chip
 
 
.Entrées / Sorties
 
Serial ATA
Six Serial ATA ports
Six SATA hard drives supported
LAN
2x RJ45 LAN ports
1x RJ45 Dedicated IPMI LAN port
USB
2x USB rear ports
1x USB on-board
2x USB internal headers
Total 5 USB 2.0 Compliant
VGA
1x VGA Port
Keyboard / Mouse
PS/2 keyboard and mouse ports
Serial Port / Header
1 Fast UART 16550 serial port
1 Fast UART 16550 serial header (Option)
 
 
.Chassis ( optimisé pour X8DTL-iF )
 
Important Chassis Notes
To support the new generation Intel® Xeon® processor-based motherboards, a Revision K chassis is recommended for most models. Please talk to your sales representative or follow the link for details.
 
 
.Ports d'extensions
 
PCI-Express
2 (x8) PCI-E 2.0 (1 in x16 slot)
1 (x4) PCI-E 2.0 (in x8 slot)
1 (x4) PCI-E (in x8 slot)
PCI
2x 33MHz PCI slots
 
 
.BIOS
 
BIOS Type
32Mb SPI Flash EEPROM with AMI® BIOS
BIOS Features
Plug and Play (PnP)
PCI 2.2
ACPI up to 3.0
USB Keyboard support
 
 
.Management
 
Software
IPMI (Intelligent Platform Management Interface) v1.5 / 2.0 with KVM support
Super Doctor III
Power Configurations
ACPI / ACPM Power Management
 
 
.Monitoring
 
CPU
Monitors for CPU Cores, +1.8V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory, Chipset Voltages.
4-Phase-switching voltage regulator
 
FAN
Total of six fan headers supporting up to 6 fans
Six 4-pin fan headers
6x fans with tachometer status monitoring
Support 3-pin fans (w/o speed control)
Low noise fan speed control (4-pin fan only)
 
Temperature
Monitoring for CPU and chassis environment
Thermal Control for 6x fan connectors
PECI
 
Other Features
Chassis intrusion detection
Chassis intrusion header
 
 
.Températures / Humidités
 
RoHS Compliant 6/6, Pb Free
Environmental Spec.
Operating Temperature: 10° to 35° C (50° to 95°F)
Non-operating Temperature: -40° to 70° C (-40° to 158° F)
Operating Relative Humidity: 8% to 90% (non-condensing)
Non-operating Relative Humidity: 5 to 95% (non-condensing)
  • Quelques avis client

Avis des internautes sur X8DTL-iF (0 avis)

pixel_trans
Il n'y a actuellement aucun avis pour cet article, soyez le premier à donner le votre.
pixel_trans
pixel_trans
[Ajouter votre commentaire]




Articles consultés
<
>


Ce site utilise des cookies destinés à optimiser votre expérience sur ce site et à vous proposer des offres correspondant à vos centres d’intérêt. En naviguant sur ce site, vous consentez à l’utilisation de ces cookies.
J’ai compris