Key Features
1. Single socket R3 (LGA 2011) supports
Intel® Xeon® processor E5-2600
v4†/ v3 and E5-1600 v4†/ v3 family
2. Intel® C612 chipset
3. Up to 1TB† ECC 3DS LRDIMM , up to
DDR4- 2400†MHz ; 8x DIMM slots
4. 1 PCI-E 3.0 x4 (in x8), 1 PCI-E 3.0 x8
(in x16), 2 PCI-E 3.0 x8, 1 PCI-E 2.0
x2 (in x4), 1 PCI-E 2.0 x4 (in x8)
5. Intel® i350-AM4 Quad port GbE LAN
6. 10x SATA3 (6Gbps) via C612
7. 8x SAS3 (12Gbps) via Broadcom 3008 SW
controller; RAID 0, 1, 10
7. 1x VGA, 2x COM, 1x TPM
8. 4x USB 3.0 ports, 8x USB 2.0 ports
9. 2x SuperDOM with built-in power
Product SKUs
MBD-X10SRH-CLN4F -B
X10SRH-CLN4F (Bulk Pack)
Physical Stats
Form Factor
ATX
Dimensions
12" x 9.6", (30.5cm x 24.4cm)
Processor
CPU
Intel® Xeon® processor E5-2600 v4†/ v3, E5-1600 v4†/ v3 family (up to 145W TDP **)
Single Socket R3 (LGA 2011)
Core / Cache
Up to 22 Cores† / Up to 55MB† Cache
Note † BIOS version 2.0 or above is required
Note ** Motherboard supports this maximum TDP. Please verify your system can thermally support
** E5-1600 series CPU does not support LRDIMM type memory
System Memory
Memory Capacity
8x 288-pin DDR4 DIMM slots
Up to 1TB ECC 3DS LRDIMM
Up to 512GB ECC LRDIMM
Up to 256GB ECC RDIMM
Memory Type
2400†/ 2133/1866/1600MHz ECC DDR4 SDRAM 72-bit, 288-pin (RDIMM / LRDIMM) / 284-pin gold-plated DIMMs
DIMM Sizes
3DS LRDIMM: 128GB
LRDIMM: 64GB, 32GB
RDIMM: 32GB, 16GB, 8GB, 4GB
Memory Voltage
1.2 V
Error Detection
Corrects single-bit errors
Detects double-bit errors (using ECC memory)
On-Board Devices
Chipset
Intel C612 chipset
SAS
SAS3 (12Gbps) via Broadcom 3008
SW RAID 0, 1, 10
SATA
SATA3 (6Gbps) via C612 controller
RAID 0, 1, 5, 10 support
IPMI
Support for Intelligent Platform Management Interface v.2.0
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
ASPEED AST2400 BMC
Network Controllers
Intel® i350-AM4 Quad Port Gigabit Ethernet
Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
1x Realtek RTL8201N PHY (dedicated IPMI)
Graphics
ASPEED AST2400 BMC
Input / Output
SAS
8x SAS3 (12Gbps) ports
SATA
10x SATA3 (6Gbps) ports
LAN
4x RJ45 Gigabit Ethernet LAN ports
1x RJ45 Dedicated IPMI LAN port
USB
4x USB 3.0 ports (2 rear + 1 via header + 1 Type A)
8x USB 2.0 ports (2 rear + 6 via header)
Video
1x VGA port
Serial Port / Header
2x fast UART 16550 serial, 2 COM ports (1 rear, 1 header)
SuperDOM
2x SuperDOM (Disk on Module) ports with built-in power
TPM
1x TPM Header
OS Compatibility
• Please reference the OS Compatibility Chart for details
Chassis (Optimized for X10SRH-CLN4F )
1U Chassis:
SC813MFTQ-441CB
SC813MFTQ-R400CB
SC813MFTQ-R606CB
SC113MFAC2-R606CB
SC113MFAC2-605CB
2U Chassis:
SC823TQ-653LPB
SC213A-R740LPB
SC825TQ-R720LPB
SC826BAC4-R920LPB
SC216BAC-R920LPB
SC826BE1C-R920LPB
SC216BE1C-R920LPB
3U Chassis:
SC836BE1C-R1K03B
SC833T-653B
SC836TQ-R500B
Mid/Mini Tower Chassis:
SC732i-500B
4U / Tower Chassis:
SC847BE1C-R1K28LPB
SC842TQ-865B
SC842TQ-665B
SC743T-665B
SC846BE1C-R1K28B
Important Chassis Notes
To support the new generation Intel® Xeon® processor-based motherboards, Revision M chassis is recommended. Please talk to your sales representative for details.
SuperServer(s) with X10SRH-CLN4F
Model(s)
SSG-5028R-E1CR12L
SYS-5048R-E1CR36L
Expansion Slots
PCI-Express
1x PCI-E 3.0 x4 (in x8) slot
1x PCI-E 3.0 x8 (in x16) slot
2x PCI-E 3.0 x8 slots
1x PCI-E 2.0 x2 (in x4) slot
1x PCI-E 2.0 x4 (in x8) slot
System BIOS
BIOS Type
128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features
Plug and Play (PnP)
APM 1.2
DMI 2.3
PCI 2.3
ACPI 1.0 / 2.0 / 3.0 / 4.0
USB Keyboard support
Hardware BIOS Virus protection
SMBIOS 2.7.1
UEFI 2.3.1
RTC (Real Time Clock) Wakeup
Management
Software
IPMI 2.0 with KVM support
SuperDoctor® 5
Watch Dog
Power Configurations
ACPI Power Management
Keyboard Wakeup from Soft-Off
CPU Fan auto-off in sleep mode
Power-on mode for AC power recovery
PC Health Monitoring
Voltage
Monitors for CPU Cores, +3.3V, +5V, +12V, +5V Standby, VBAT, HT, Memory, Chipset Voltages.
FAN
Total of 6 fan headers supporting up to 6 fans
6 fans with tachometer status monitoring
Status monitor for speed control
Status monitor for on/off control
Low noise fan speed control
Pulse Width Modulated (PWM) fan connectors
Temperature
Monitoring for CPU and chassis environment
CPU thermal trip support
I2C temperature sensing logic
Thermal Monitor 2 (TM2) support
PECI
LED
CPU / System Overheat LED
Suspend static indicator LED
UID/Remote UID
Other Features
Chassis intrusion detection
Chassis intrusion header
Chipkill support
RoHS, Halogen Free
Operating Environment
Operating Temperature Range
0°C ~ 50°C (32°F ~ 122°F)
Non-Operating Temperature Range
-40°C ~ 70°C (-40°F ~ 158°F)
Operating Relative Humidity Range
8% ~ 90% (non-condensing)
Non-Operating Relative Humidity Range
5% ~ 95% (non-condensing)
Parts List (Bulk Package)
Part Number Qty Description
Motherboard MBD-X10SRH-CLN4F 1 X10SRH-CLN4F Motherboard
I/O Cables CBL-0044L 2 57.5CM SATA FLAT S-S PBF
I/O Shield MCP-260-00042-0N 1 STD I/O SHIELD